Sync; Input Signal Display - Panasonic TH-42PH20U Operating Instructions Manual

SYNC

This function operates only during input from PC IN terminal.
Select SIGNAL from the "SET UP" menu during RGB or Component input signal.
Setting RGB sync signal
Con¿ rm that the input is set to RGB input (this setting is valid only for RGB input signal).
AUTO: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.
Setting Component sync signal
Con¿ rm that the input is set to Component input (this setting is valid only for Component input signal).
AUTO: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
ON Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.
Note:
Accepts only RGB signals from COMPONENT/RGB IN terminal with "SYNC ON G".

Input signal display

Displays the frequency and the type of the current input signal.
This display is valid only for COMPONENT/RGB/PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
The dot clock frequency is displayed during digital signal input.
Press to select the "SYNC".
Press to adjust.
SET UP for Input Signals
SIGNAL
SYNC
3 : 2 PULLDOWN
XGA MODE
H-FREQ.
V-FREQ.
SIGNAL FORMAT 1280×1024/60
H-FREQ.
V-FREQ.
DOT CLOCK FREQ.
SIGNAL FORMAT 1280×1024/60
[ RGB ]
AUTO
OFF
AUTO
63.98 kHz
60.02 Hz
63.98 kHz
60.02 Hz
108.0 MHz
43