Adjusting Brightness, Contrast And Colour - Brother MFC-J2510 User Manual

k
Swipe up or down, or press a or b to
display 10x15cm, 13x18cm, A4, A3,
Letter or Ledger.
Press the option you want to set.
Do one of the following:
 If you chose A4 or Letter, go to
step l.
 If you chose 10x15cm or 13x18cm,
go to step m.
If you chose A3 or Ledger, the

Touchscreen will prompt you to put
the paper in the manual feed slot.
Read the information on the
Touchscreen, and then confirm it by
pressing OK. (See Basic User's
Guide: Loading paper in the manual
feed slot.)
Go to step m.
l
Press Print Size.
Swipe up or down, or press a or b to
display the options in the following table,
and then press the option you want to
set.
Example: Printed position for A4 size paper
1 2
8x10cm 9x13cm
4 5
13x18cm 15x20cm
m
If you do not want to change additional
settings, press
Press Start to print.
Printing photos from a memory card or USB Flash memory drive
3
10x15cm
6
Max. Size
or OK.
Adjusting Brightness,
Contrast and Colour
Brightness
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
e
Press View Photos.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Swipe up or down, or press a or b to
display Brightness.
j
Press Brightness.
k
Adjust the level of brightness by
pressing it on the Touchscreen.
l
If you do not want to change additional
settings, press
Press Start to print.
8
8
or OK.
57
8