Brother MFC-J2510 User Manual page 84

Mfc-j2510; mfc-j4510dw
Hide thumbs Also See for MFC-J2510:
Table of Contents

Advertisement

Innobella™
Innobella™ is a range of genuine
consumables offered by Brother. For best
quality results, Brother recommends
Innobella™ ink and paper.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal reports. You can print the Fax
Journal report on demand without
interrupting the cycle.
Manual fax
You can press Hook to hear the receiving
fax machine answer before you press
Fax Start to begin sending the fax.
Memory Receive
Receives faxes into the machine's
memory when the machine is out of paper.
OCR (optical character recognition)
Nuance™ PaperPort™ 12SE or Presto!
PageManager software application
converts an image of text to text you can
edit.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Pause
Allows you to place a 3.5 second delay in
the dialling sequence while you are
dialling using the dial pad or while you are
storing Address Book numbers. Press
Pause on the Touchscreen as many times
as needed for longer pauses.
PhotoCapture Center™
Allows you to print digital photos from your
digital camera at high resolution for photo
quality printing.
Photo resolution (Mono only)
A resolution setting that uses varying
shades of grey for the best representation
of photographs.
78
PictBridge
Allows you to print photos directly from
your digital camera at high resolution for
photo quality printing.
Polling
The process of a fax machine calling
another fax machine to retrieve waiting fax
messages.
Pulse (Not available in New Zealand)
A form of rotary dialling on a telephone
line.
Real Time Transmission
When the memory is full, you can send
faxes in real time.
Remaining jobs
You can check which jobs are waiting in
memory and cancel jobs individually.
Remote Access Code
Your own four-digit code (--- ) that allows
you to call and access your machine from
a remote location.
Remote Activation Code
Press this code (l 5 1 (l 9 1 for New
Zealand)) when you answer a fax call on
an extension or external telephone.
Remote Deactivation Code
(For Fax/Tel mode only)
When the machine answers a voice call, it
fast double-rings. You can pick up at an
extension telephone by pressing this code
(# 5 1 (# 9 1 for New Zealand)).
Remote Retrieval Access
The ability to access your machine
remotely from a touch-tone telephone.
Resolution
The number of vertical and horizontal lines
per inch. See: Standard, Fine, Super Fine
and Photo.
Ring Delay
The number of rings before the machine
answers in Fax Only and Fax/Tel
modes.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j4510dw

Table of Contents