Panasonic TH-50PB2W Operating Instructions Manual page 21

Mounting Charger to Display
The charger can be mounted on the display with the included mounting plate.
1. Attach the mounting plate to the charger with the included screws
• The illustration shows the case that the charger is attached to the left side of display when seen from the front.
To attach it to the right side, reverse the mounting plate.
2. Among the screws shown below, remove the screw of the position where you mount the charger.
TH-50PB2W
For portrait installation
TH-65PB2W
For portrait installation
21