Sanyo PDG-DXL2000 Service Manual page 14

Mechanical Disassembly
x Optical unit Lamp and CW removal
1. Loosen 2 screws A and pull the Lamp assy upward off.
2. R emove 1 screw B(M2.5x6) to remove Temp. Sensor 2 board.
3. R emove 1 screw C(T3x12)x2 and 2 screws D (M4x8) to remove the Optical Unit upward
off.
Color Wheel
assy
(M2x8)x2
(M2x6)x2
Bushes
Optical unit
Fig.2
(M2x8)x3
Color Wheel
D
C
-14-
(M2x8)x1
CW Sensor
board
(M2x6)x2
Temp Sensor 2
board
D
B
A
Lamp assy