Panasonic NR-B32FE2 Service Manual page 43

11.8.4. Install Door A'ssy FC
1. Install Hinge Bottom L
a. Tear off the Label Bottom that is sealed at the position
of Hinge Bottom L of bottom and left side of the appli-
ance.
b. Seal the Label Bottom at the setting position of Hinge
Bottom R of bottom and right side of the appliance.
c. Pull out the Cover Hole Hinge that is inserted in the
setting hole of Hinge Center L of middle height and
left side of the appliance.
d. Insert the Cover Hole Hinge in the setting hole of the
Hinge Center R of middle height and right side of the
appliance.
NOTES
• Wipe a grease of around the area with a new or
cleaned cloth before installing Label Bottom and the
Cover Hole Hinge, because grease might remain.
• Wipe a grease of around gasket touching face of
body and the gasket with a new or cleaned cloth.
e. Remove plastic washer from Hinge Bottom R, insert
plastic washer into Hinge Bottom L.
f. Install Hinge Bottom L by screws that are fixation of it.
(Torque of screw : 6 ± 2 N·m)
CAUTION
• These screws of Hinge Bottom L are needed to screw by
using a torque wrench.
2. Install Door A'ssy FC
a. Install Shim Hinge FCT that was removed before (see
11.8.2.1) - in the hole of upper and left side of Door
A'ssy FC.
b. Install Cap Hinge Pin FCT in upper and right side of
Door A'ssy FC.
c. (3)First open Door A'ssy FC, install Hinge Center L in
the Refrigerator by screws for fixation.
(Torque of screw: 6 ± 2 N·m)
d. Apply the grease of bundled parts on around pin of
Hinge Bottom L, and insert Door A'ssy FC into Hinge
Bottom L.
e. Apply the grease of bundled parts on around of Shim
Hinge FCT on Door A'ssy FC.
f. Shim Hinge FCT and Hinge Center L put together,
and screw Pin Hinge Center on Hinge Center L.
(Torque of screw: 6 ± 2 N·m)
CAUTION
• Pin Hinge Center is screwed on Hinge Center L by using
a torque wrench.
• Two screws of Hinge Center L are screwed by using a
torque wrench.
CAUTION
• Screw these screws up Hinge Center L and hinge Bot-
tom L securely, there must not be them loosening. And
screw Pin Hinge Center L up Hinge Center L securely
too, there must not be it loosening. Because it might
become cause of an accident of falling door and there is
a possibility that an unexpected serious accident occurs.
43