Change Your Settings; Settings; Picture - Philips BDL4970EL User Manual

BDL4970EL
5.

Change your settings

Using the remote control:
1. Press [ ] HOME button to display the OSD menu.
2. Press [ ] [ ] [ ] or [ ] button to choose its menu item or to
adjust its value. Press [
] BACK button to go back to the previous menu layer.
3. Press [
] HOME button to exit the OSD menu.
4. Press [
Using the display's control buttons
1. Press [ ] button to display the OSD menu.
] [ ] [ ] or [ ] button to choose menu item or adjust
2. Press [
its value.
3. Press [ ] button to confirm menu selection and enter its
submenu.
4. Press [ ] button to exit the OSD menu.
5.1.

Settings

] HOME button.
Press [

5.1.1. Picture

Picture Picture style
Sound Backlight
Tiling Colour
Network
Sharpness
Storage Noise reduction
m e n u
General settings
MPEG artifact reducti...
Adv. Picture enhancement
Advanced
Scan mode
Format and edges
Picture reset
] button to confirm.
Picture style
Choose a predefined picture setting.
Backlight
Adjust the brightness of this display's backlight.
Colour
Adjust the colour saturation of the picture.
Sharpness
Adjust the sharpness of the picture.
Noise reduction
Choose the amount of noise reduction for the picture.
MPEG artifact reduction
Smoothen transitions and haziness in the digital picture.
Picture enhancement
Fine-tune each pixel to match surrounding pixels and produce a brilliant,
high-definition image.
• {Advanced sharpness}: Enable superior sharpness, especially on
lines and contours in the picture.
• {Dynamic contrast}: Dynamically enhance the details in the
dark, medium and light areas of the picture.
• {Colour enhancement}: Dynamically enhance the vividness and
details of colours.
Advanced
Access advanced settings such as gamma, tint, video contrast and so on.
• {Gamma}: Adjust the non-linear setting for picture luminance
and contrast.
The options are Native, S gamma, 2.2, 2.4, and D-Image.
Note: D-Image is to simulate DICOM curve for X-ray photos.
• {Tint}: Change the colour balance.
• {Custom tint}: Customise colour balance setting. Only available
if {Tint}  {Custom} is chosen.
• {Video contrast}: Adjust video contrast.
• {Brightness}: Adjust screen brightness.
• {Hue}: Adjust screen hue.
Scan mode
Change the display area of the image.
Format and edges
• {Picture format}: Change the picture format.
• {Zoom}: Expands the horizontal and vertical sizes of the image
simultaneously.
• {H Zoom}: Expands the horizontal size of the image only.
• {V Zoom}: Expands the vertical size of the image only.
Note: Zoom, H Zoom and V Zoom are functional only when the
Picture format setting is set to Custom Zoom.
See page 18 for the descriptions about
Picture reset
Reset all your picture settings to the factory defaults.
22
Picture format
.