Philips BDL4970EL User Manual page 39

B. The default Main Page of Web Control is Power Page. It provides
you an easy way to turn the display on or put the display to standby.
Power Off: Put the display to standby.
Power On: Turn the display on.
Get Power status: Click this button to get the display status.
Note: Power On function only supported after setting Eco mode to
Normal.
C. Click on video to switch to Video Page. It provides you an easy way
to adjust video settings.
Brightness: Adjust the overall image brightness by changing the intensity
of the LCD panel's backlight. 0(minimum) to 100(maximum).
Video contrast: Adjust to sharpen the picture quality. The black portions
of the picture become richer in darkness and the white become brighter.
0(minimum) to 100(maximum).
Color: Adjust to increase or decrease the intensity of colors in the image.
0(minimum) to 100(maximum).
Sharpness: Adjust to improve image detail. 0(minimum) to
100(maximum).
Hue: Adjust screen hue. -50(minimum) to 50(maximum).
Backlight: Adjust the brightness of the display's backlight. 0(minimum) to
100(maximum).
Gamma: Adjust the non-linear setting for picture luminance and contrast.
1(minimum) to 4(maximum).
Noise Reduction: Adjust to remove the noise in the image. You can select
a suitable noise reduction level. Choose from: Off/Low/Medium/High
Picture Format: Change the display area of the image. You can select a
suitable format. Choose from: Auto zoom/Movies expand 16:9/Wide
screen/Unsealed/4:3
Video Source: Choose input source. Choose from USB/Network/
Internet/SmartCMS/CVBS/YPbPr/VGA/HDMI/DVI-D
Auto Adjust: Use the auto adjust function to automatically to optimize
the display of the image position.
D. Click Audio to switch to Audio Page. It provides you an easy way to
adjust audio settings.
Volume: Adjust to increase or decrease the volume. 0(minimum) to 60
(maximum).
Treble: Adjust to increase or decrease higher-pitched sounds.
-8(minimum) to 8(maximum).
Bass: Adjust to increase or decrease lower-pitched sounds. -8(minimum)
to 8(maximum).
E. Click on Color to switch to Color Page. It provides you an easy way
to adjust color settings.
Tint: Change the color balance. Choose from Cool/Normal/Warm/
Custom
Custom tint: With this function you can adjust the color tones of the
image precisely by changing the R(Red), G(Green) and B(Blue) settings,
respectively.
Note: Custom tint only available when Tint is set to Custom.
F. Click on Tiling to switch to Tiling Page. With this function you can
create a single large-screen matrix (video wall) that consists of up
to 225 sets of this display (up to 15-sets on the vertical and 15-sets
on the horizontal sides).
29
BDL4970EL