5.
Slide the top cover towards the rear of VivoPC until it is
detached from the chassis.
6.
Remove the cover and set it aside.
7. Carefully slide the DualBay adapter from the SATA connector,
then remove it from the drive bay.
NOTE:
• The VivoPC barebone is shipped with an empty DualBay adapter
by default. If you wish to replace the DualBay adapter with a 3.5-
inch HDD, refer to the section Installing a 3.5-inch HDD for more
information.
• The Vivo DualBay adapter in this manual is for reference only.
VivoPC Barebone
23