Table of Contents
Advertisement
14. Secure the 2.5-inch HDD/SSD to the top cover using the set of
bundled screws.
15. Place the top cover and HDD/SSD assembly into the Vivo
DualBay adapter, then slide it towards the SATA connector.
NOTE: Ensure that the SATA connector of the HDD/SSD on the top
cover matches the SATA connector on the Vivo DualBay adapter, and
that the screw holes at the rear of the top cover matches the screw
holes on the adapter as shown.
SATA connector
Vivo DualBay adapter and
2.5-inch HDD/SSD assembly
screw holes (Vivo DualBay adapter)
Top cover and 2.5-inch
HDD/SSD assembly
Screw holes (top cover)
VivoPC Barebone
31
Advertisement
Table of Contents
