Table of Contents
Advertisement
Automatic update option.
3. With the arrow keys, select the satellite you do not
wish to update. Press OK to unmark the satellite.
4. Select Done and press OK to close the menu.
The TV will not update the channels from satellite you
marked.
Start an update yourself
1. Press and select Setup and press OK.
2. Select Search for satellite and press OK.
3. Select Update channels and press OK.
4. If you want to check which satellites are set for
updating, select Settings and press OK.
5. With the arrow keys, mark or unmark the satellites
for updating. Select Done and press OK.
6. Select Update and press OK. The update may take
a few minutes.
7. Select Finish and press OK.
Languages and audio
Preferred languages and subtitles
Satellite channels can hold different audio languages,
subtitle languages or Text languages. You can set the
TV to automatically switch to the language, subtitle
language or Text language you prefer, if this language
is available on the channel or Text pages.
To set the your preferred language . . .
1. Press and select Setup and press OK.
2. Select Satellite settings and press OK.
3. Select Languages and press OK. Select the setting
you want.
4. Press , repeatedly if necessary, to close the
menu.
Audio description
Speakers / Headphones
You can select where you want to hear the audio
commentary. On the TV speakers only, on the
headphones only or on both.
To set Speakers / Headphones . . .
1. Press and select Setup and press OK.
2. Select Satellite settings > Languages > Audio
description > Speakers / Headphones and press OK.
3. Select Speakers, Headphones or Speakers +
headphones and press OK.
4. Press , repeatedly if necessary, to close the
menu.
Audio effect
Some audio commentary can hold extra audio
effects, like stereo or fading sound.
To switch on Audio effects (if available) . . .
1. Press and select Setup and press OK.
2. Select Satellite settings > Languages > Audio
description > Audio effects and press OK.
3. Select On or Off and press OK.
4. Press , repeatedly if necessary, to close the
menu.
Speech
The audio commentary can also hold subtitles for the
words which are spoken.
To switch on these subtitles (if available) . . .
1. Press and select Setup and press OK.
2. Select Satellite settings > Languages > Audio
description > Speech and press OK.
3. Select Descriptive (audio) or Subtitles and press
OK.
4. Press , repeatedly if necessary, to close the
menu.
Manual installation
Manual installation is intended for expert users.
You can use Manual installation to quickly add new
channels from a satellite transponder. You need to
know the frequency and polarization of the
transponder. The TV will install all channels of that
transponder. If the transponder was installed before,
all its channels - the former and the new ones - are
moved to the end of the channel list All.
You cannot use Manual installation if you need to
change the number of satellites. If this is needed, you
have to do a complete installation with Install
satellites.
To install a transponder . . .
1. Press and select Setup and press OK.
2. Select Satellite settings > Channel installation >
Manual installation and press OK.
3. If you have more than 1 satellite installed, select
the satellite/LNB for which you want to add channels.
4. Set the Polarization you need. If you set the
Symbol rate mode to Manual, you can enter the
symbol rate in Symbol rate manually. Enter the
Frequency and start searching for the transponder.
5. If a transponder is found, select Store and press
OK to store the new transponder on the selected
LNB.
6. Select Exit to leave the manual installation.
28
Advertisement
Table of Contents
