Connect The Notebook To The Port Replicator - Fujitsu LIFEBOOK T904 Operating Manual

Working with the notebook

Connect the notebook to the port replicator

► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
2
2
3
1
5
4
► Position the notebook on the port replicator in such a way that the docking connector on the
underside of the notebook is aligned with the docking connector of the port replicator as shown (1).
► Press down on the notebook's rear corners so that it locks into position (2).
► Connect the mains adapter cable to the DC jack (DC IN) of the port replicator (3).
► Connect the power cable to the mains adapter (4).
► Plug the power cable into the mains socket (5).
56 Fujitsu