Checking The Engine-Oil Level; Checking And Adjusting The Skids - Toro SnowMaster 724 QXE Operator's Manual

Checking the Engine-Oil Level

Service Interval: Before each use or daily
Figure 15
Checking and Adjusting the
Skids
Service Interval: Yearly
Check the skids to ensure that the auger does not contact the
paved surface. Adjust the skids as needed to compensate for
wear (Figure 16).
1. Loosen the skid bolts.
2. Slide a 5 mm (3/16 inch) board underneath the scraper.
Note: Using a thinner board will result in a more
aggressive scraper. A thicker board will result in a less
aggressive scraper.
3. Lower the skids to the ground.
Note: Ensure that the skids are flat on the ground.
4. Tighten the skid bolts.
14
Figure 16