Brother BAS H Series Instruction Manual page 5

(8) Step No. keys
(9) Split No. keys
(10) Speed keys
(11) Section No. keys
(12) Tension keys
(13) Wiper key
(14) Thread key
(15) Clamp key
(16) Scale Offset key
(17) Slow Start key
(18) Wind key
(19) Direct selection keys
(20) Tension operation check key
(21) Test key
(22) Current stitch number
/ Total number of stitches
(23) Sewing area size
(24) Sewing data information
(25) Preview
(26) Scale/Offset key
(27) Model name
(28) Date and time
(29) Comments
(30) Tension editing check key
Touch to display/select the current step number.
Touch to display/select the current split number.
Touch to display/select the sewing speed.
Touch to display/select the section number for the digital tension.
These are not displayed when digital tension is not being used.
Touch to display/select the digital tension value.
These are not displayed when digital tension is not being used.
Touch to switch the thread wiper on/off.
Touch to switch to the threading screen.
Touch to switch to the Adjust Clamp Height setting screen.
Touch to switch to the Scale/Offset setting screen.
Touch to switch to the Slow Start setting screen.
Touch to switch to the thread winding screen.
This is not displayed for the BAS-360H/365H.
You can register normal/cycle program numbers into each of these keys.
When you keep pressing a key, the program assigned to that key is selected.
Touch to switch to the tension operation check mode.
This is not displayed when digital tension is not being used.
Touch to switch to test mode.
Shows the current stitch number and the total number of stitches.
Shows the size of the sewing data area.
Shows information about the sewing data.
Shows a preview of the sewing data.
This is displayed when the Scale/Offset setting values have been changed from the
default setting values.
Touch the key to display the setting value.
Shows the model name and specifications.
Shows the current date and time.
Shows comments about the sewing data.
Touch to switch to digital tension editing mode.
This is not displayed when digital tension is not being used.
BAS H series
1. USING THE LCD PANEL (BASIC OPERATIONS)
3