Replacing An Auxiliary Light Bulb - Yamaha 2005 MT-01 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
6. Install the license plate light cover
by installing the screws.
6
Replacing an auxiliary light
bulb
This model is equipped with three aux-
iliary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Auxiliary light bulb A
2. Auxiliary light bulb B
3. Auxiliary light bulb C
1. Remove the headlight unit by re-
moving the bolts on each side.
6-30
EAU36840
1. Bolt
NOTE:
Skip steps 2 and 7 if the auxiliary light
bulb A is being replaced.
2. To replace auxiliary light bulb B or
C, remove the corresponding
headlight unit side cover bracket
and the headlight unit side cover
by removing the screws.