Replacing The License Plate Light Bulb; Replacing An Auxiliary Light Bulb - Yamaha 2008 WR250R Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing the license plate
light bulb
1. Remove the license plate light unit
1 by removing the screws.
2
3
4
5
1. Screw
6
2. Remove the socket (together with
the bulb) by pulling it out.
7
8
9
EAU24310
1
1
1. License plate light unit
2. License plate light bulb socket
3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.
Replacing an auxiliary light
bulb
If the auxiliary light bulb burns out, re-
2
place it as follows.
1. Auxiliary light bulb socket
6-36
1. Remove the headlight unit. (See
page 6-33.)
2. Remove the auxiliary light socket
(together with the bulb) by pulling it
out.
1
3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the auxiliary light socket (to-
gether with the bulb) by pushing it
in.
6. Install the headlight unit.
EAU45220