Sound Pressure; Vibration; Safety And Instruction Decals - Toro 41163 Operator's Manual

Sound Pressure

This unit has a maximum sound pressure level at the
operator's ear of 82 dBA, based on measurements of
identical machines per Directive 98/37/EC.

Vibration

This unit does not exceed a hand/arm vibration level of
2
2.5 m/s , based on measurements of identical machines per
Directive 98/37/EC.

Safety and Instruction Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
104-7634
1. Read the Operator's Manual.
100-8458
1. Machine speed
2. To set the machine to a slow speed, reduce pressure on the
accelerator and pull up on the speed limiter.
3. To set the machine to a fast speed, press the accelerator pedal
and push down on the speed limiter.
This unit does not exceed a whole body vibration level of
2
0.5 m/s , based on measurements of identical machines per
Directive 98/37/EC.
100-8454
1. Read the Operator's Manual for information on the
transmission.
2. To start the engine, sit on the operator's seat, press the brake,
set the range selector to Neutral, turn the ignition key to
Engine-start, set the range selector to the desired gear, release
the brake pedal and parking brake, and press the accelerator
pedal to the desired speed.
3. To stop the engine, press the brake, set the range selector to
Neutral, set the brake, and turn the ignition key to Engine-stop.
4. Range selector gear pattern
7