Lenovo S510 Hardware Maintenance Manual page 111

Hide thumbs Also See for S510:
Table of Contents

Advertisement

1. Remove any media from the drives and turn off all connected devices and the computer. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to the
computer.
2. Remove the computer cover. See "Removing the computer cover" on page 82.
3. Locate the Wi-Fi card. See "Computer components" on page 31.
4. Disconnect the Wi-Fi antenna cables from the Wi-Fi card, and then remove the screw that secures the
Wi-Fi card.
Figure 42. Removing the Wi-Fi card cables
5. Pull the Wi-Fi card out of the M.2 Wi-Fi card slot.
Figure 43. Removing the Wi-Fi card
6. Insert the new Wi-Fi card into the M.2 Wi-Fi card slot. Ensure that the Wi-Fi card is inserted firmly. Then,
pivot the Wi-Fi card as shown so that the screw notch on the Wi-Fi card aligns with the mounting stud
on the system board.
Note: Do not touch the notched edge of the Wi-Fi card.
Figure 44. Installing the Wi-Fi card
.
Chapter 9
Installing or replacing hardware
105

Advertisement

Table of Contents
loading

Table of Contents