Lenovo S510 Hardware Maintenance Manual page 94

3. Remove the front bezel. See "Replacing the front bezel" on page 82.
4. Locate the optical drive. See "Computer components" on page 31.
5. Disconnect the signal cable and the power cable from the rear of the optical drive.
6. Remove the two screws that secure the optical drive, and then slide it out of the front of the computer.
Figure 18. Removing the optical drive
7. Slide the new optical drive into the optical drive bay from the front of the computer until the screw holes
in the optical drive align with the corresponding screw holes in the chassis.
Figure 19. Installing the optical drive
88
Lenovo S510 Hardware Maintenance Manual