7. Detaching and attaching the Panel Fan Duct assembly
When disassembling
Remove 7 screws and unhook the panel fan duct assembly as shown in the diagram.
T3x12
Sirocco fan
When assembling
(1) Put the thermistor in the correct position on the Panel duct as shown in the diagram.
CP-A100 / ED-A100 / ED-A110 (A1DN)
Make sure to put 8 spacers (
cable groove
67
CAUTION
Confirm that a cushion is put on duct.
Otherwise, power will shut down.
Release the hook
Thermistor
parts) on the boss.
cable groove