Maintenance; Recommended Maintenance Schedule(S) - Toro 31230 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 10 hours
After the first 50 hours
After the first 200 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 150 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 2 years
Important: Refer to your engine operator's manual for additional maintenance procedures. A detailed Service
Manual is also available for purchase from your Authorized Toro Distributor.
Maintenance Procedure
• Check the tension on the alternator belt.
• Torque the wheel-lug nuts.
• Change the engine oil and filter.
• Change the hydraulic fluid and filter.
• Test the safety-interlock system.
• Check the engine-oil level.
• Check the engine-coolant level.
• Check the hydraulic fluid level.
• Grease the bearing and bushing grease fittings. Grease the bearing and bushing
grease fittings more frequently in extremely dusty and dirty conditions.
• Check the battery cable connections.
• Check the tire pressure.
• Check the tension on the alternator belt.
• Change the engine oil and filter.
• Torque the wheel-lug nuts.
• Service the air cleaner. (Service the air cleaner earlier if the air-cleaner indicator
shows red. Service it more frequently in extremely dirty or dusty conditions.)
• Replace the fuel filter canister.
• Check the fuel lines and connections.
• Change the hydraulic fluid and filter.
• Inspect the engine-valve clearance. Refer to your engine operator's manual.
• Drain and clean the fuel tank.
25