Table of Contents
Advertisement
Maintenance
Minimum Recommended Maintenance Intervals
Maintenance Procedure
Check battery fluid level
Check battery cable connections
Lubricate all grease fittings
Change engine oil
Inspect air filter, dust cap and baffle
‡ Replace engine oil filter
✝ Check fan and alternator belt tension
Inspect cooling system hoses
Drain moisture—hydraulic tank
Drain moisture—fuel tank
Check reel bearing preload
✝Torque wheel lug nuts
Service the air cleaner (if indicator shows red)
Replace the fuel filter
Inspect traction linkage movement
‡ Torque cylinder head bolts and adjust valves
‡ Check engine rpm (idle and full throttle)
Change hydraulic fluid
✝ Change transmission fluid
✝ Replace transmission filter
Check rear wheel toe-in
Rear axle service
–
pack rear wheel bearings (2WD)
–
change rear axle lubricant (4WD)
✝ Initial break in at 10 hours
‡ Initial break in at 50 hours
Replace moving hydraulic hoses
Replace safety switches
Flush the cooling system and replace fluid
Drain and flush the fuel tank
Drain and flush the hydraulic tank
Maintenance Interval & Service
Every
Every
50
100
hours
hours
Items are recommended every 1600 hours or
– 24 –
Every
Every
200
400
hours
hours
Recommendations:
two years, whichever occurs first.
Every
800 hours
Advertisement
Table of Contents
