Cisco TelePresence SX20 Codec
Introduction
xCommand Video Input Source SetActiveConnector
Select which connector is active.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Input Source SetActiveConnector [ConnectorId: ConnectorId]
where
ConnectorId: Integer (2..4)
The identifier (ID) of the connector. Connector [n] has ID n. Run the following API
command to find the ID: xStatus Video Input Connector. The connector ID is also printed
on the codec connector panel.
xCommand Video Layout LayoutFamily Set
Select the screen layout mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Layout LayoutFamily Set [Target: Target] [: ] LayoutFamily:
LayoutFamily
[CustomLayoutName: "CustomLayoutName"]
where
Target: local/remote
Select if the target is the local layout or the remote layout.
: Integer (0..65534)
The CallID is returned when the xCommand Dial command is run. During the call you
can run the xStatus Call command to see the CallId.
LayoutFamily: auto/custom/equal/overlay/prominent/single
Select a layout family.
CustomLayoutName: String (1, 128)
Enter a name for the layout.
SX20 Codec API Reference Guide CE8.1, APRIL 2016.
D15316.03
About the API
xConfiguration
xCommand
xCommand
xCommand Video Matrix Assign
xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout
commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Matrix Assign [Mode: Mode] Output:
where
Mode: Add/Replace
Choose whether to replace the existing source on that output rendered full screen or to
add it. Using Add, the layout engine will recompose the multiple sources automatically.
Replace is the default value.
Output: Integer (1..2)
Choose the output you wish to use for this layout.
SourceId: Integer (1..3)
The identifier (ID) of the input source. Input Source [n] has ID n. Run the following API
command to find the ID: xStatus Video Input Source.
xCommand Video Matrix Reset
Reset the content on the output to the default layout
xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout
commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Matrix Reset [Output: Output]
where
Output: Integer (1..2)
Choose the output you want to reset.
126
API Reference Guide
xStatus
Appendices
Output
SourceId:
SourceId
Copyright © 2016 Cisco Systems, Inc. All rights reserved.