Help Guide
IC Recorder
ICD-UX570F / ICD-UX575F
Charging the battery with a computer
You can use a computer to charge the battery of your IC recorder.
If you use the IC recorder for the first time or you have not used it for an extended period of time, charge the battery until
the
indicator appears on the display window.
It takes about 3 hours (*) to fully charge the exhausted battery.
*
Approximate time period that requires to charge the exhausted battery at room temperature. It may vary depending on the remaining battery
power or the state of the battery.
Slide the USB slide lever on the side of the IC recorder downward.
1
Insert the USB connector into the USB port of a running computer.
2
While the battery is charging, the battery indicator animation (
When the battery is fully charged, the battery indicator will indicate
) appears on the display window.
(
).
36