Help Guide
IC Recorder
ICD-UX570F / ICD-UX575F
Specifying a segment of a file to play repeatedly (A-B repeat)
You can specify the starting point A and the finishing point B in a file to play the segment between the specified points
repeatedly.
While playback is on standby or in progress, press
1
starting point A.
[A-B B?] appears on the display window.
Press
(move down)/
2
[
A-B] (repeat A-B) appears and the specified segment plays repeatedly.
Note
While playback is on standby, you cannot specify the same point as the starting point A and the finishing point B. Specifying the
finishing point B cancels the specified starting point A.
You cannot turn on the button-hold repeat playback function while the A-B repeat playback function is active.
While in time jump mode, you cannot use A-B repeat.
Hint
To cancel the A-B repeat playback function and resume the normal playback, press
To change the segment specified for the A-B repeat playback function, resume the normal playback and then repeat steps 1 and
2 once again.
Related Topic
Selecting the playback mode
Repeatedly playing the current file (Button-hold repeat playback)
A-B (repeat A-B) again to specify the finishing point B.
(move down)/
A-B (repeat A-B) to specify the
(move down)/
89
A-B (repeat A-B) again.