5. Install the:
a)
battery
b)
base cover
c)
microSD card
6. Follow the procedure in
WLAN Card
Removing the WLAN card
1. Follow the procedure in
2. Remove the:
a)
microSD card
b)
base cover
c)
battery
3. Remove the single M2xL3 screw that secures the WLAN metal bracket to the computer [1] and lift and remove the metal bracket off
the WLAN card [2].
4. Disconnect the two antenna cables [3] and remove the WLAN card from M.2 connector on the system board [4].
68
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.