Display Assembly; Removing The Display Assembly - Dell Latitude 3300 Service Manual

5. Install the:
a) battery
b) base cover
c) microSD card
6. Follow the procedure in

Display assembly

Removing the display assembly

NOTE: This process is for both touch and non-touch LCDs.
1. Follow the procedure in
2. Remove the:
a) microSD card
b) base cover
c) battery
d) WLAN card
e) DC-in cable
3. Remove the tape [1] and unroute the antennae cable [2] near the fan case.
4. Remove the single screw that secures the EDP bracket [3] and remove it off the EDP connector on the system board [4].
5. Disconnect the EDP cable from the system board [5].
70 Disassembly and reassembly
After working inside your computer.
Before working inside your computer.