Manual Switching - ABB DW Series User Manual

MANUAL SWITCHING

To manually take action on the channels of DW time switches (activated with the combination described on page 6), carry out the operations
described below:
SWITCHING CHANNEL: press the key
temporary on : the selected channel is set on until the next programmed off event
temporary off : the selected channel is set off until the next programmed on event
LOCK CHANNEL: press for a long time (for 3 seconds at least) the key
until the unlocking (press again for a long time the key
permanent on the selected channel is locked in on position until the manual unlocking
permanent off the selected channel is locked in off position until the manual unlocking
RANDOM SWITCHING: press contemporary and for a long time (for 3 seconds at least) the key
Press again simultaneously and for a long time the keys
random : the selected channel is set on and then will take place switching on/off at random intervals (the minimum and maximum
interval can be set from "Settings ➔ random" menu)
CYCLE SWITCHING: press contemporary and for a long time (for 3 seconds at least) the keys
Press again simultaneously and for a long time the key
cycle (flashing) : the selected channel is set on and then will take place switching on/off (the on and off duration can be set from
"Settings ➔ cycle" menu).
for channel 1 or for channel 2. If on becomes off and vice versa.
C1 C2
or ).
C2
C1
and
C1
and or
C1
- 11 -
User manual DW
for channel 1 or for channel 2. The current state is locked
C2
C1
and
or C2 to disable the function.
and
to disable the function.
C2
for channel 1 or for channel 2.
C2
C1
for channel 1 or for channel 2
C2
C1