Configuration Procedure For Decoders - Siemens DMS8000 MP4 Series Installation, Configuration And Operations Manual

Configuration
3.5.3

Configuration procedure for Decoders

Building Technologies
Fire Safety & Security Products
Press the SHIFT key when clicking the icon to add multiple nodes at once.
4. Expand the Video Cameras folder.
5. Select the video-out node of the camera.
6. Drag and drop the 'video signal' to the DVR video-in node.
7. Connect other camera outputs to the corresponding video–ins as necessary.
Fig. 5 Connecting cameras to video inputs
Video Monitors and Alarm I/O
Each DVR unit also includes monitors and alarm in/out objects. For the configura-
tion of these objects, you can also refer to the Video Connectivity Guide (doc.no.
A6V10062457).
Video camera coverage
The video camera coverage is configured graphically or via manual associations as
described in the Graphical Map Configuration (doc.no. A6V10062441).
Camera Extensor tab and Preset Position for event treatment
In the Camera Extensor tab of each node, you can see the camera associations
and manually add one or more cameras to the list associated with the selected
node. Also, for dome and PTZ motorised cameras, you can set the default Preset
Position where the camera is moved when is first selected during event treatment.
Refer to the point customization section of the MM8000 Installation, Configuration
and Commissioning manual (ICC, doc.no. A6V10062413) for more information
about the Camera Extensor tab.
The following is the configuration procedure for a Decoder unit:
Adding a folder
 Optionally, create a folder for the Decoder unit.
Adding the Decoder node
1. Select the new folder.
2. Click the Video menu .
048_DMS_MM8000_NICE_Add-On_MP4.30_A6V10097205_a_en.doc
9
06.2010