Before Use; Switching The Device On; Grinding - Silvercrest HG01100-BS Operation And Safety Notes

Before use

Check the device for damage before every use.
Place the device on a level, non-slip surface.

Switching the device on

Plug the mains plug into a socket that has been professionally
installed.
Select the desired grinding function 1, 2 or 3 by turning the func-
tional and protective cover until it locks into place. In e.g.
6
position 2 "Serrated edge knives", the respective symbol will point
at the arrow on grinder opening. The functional and protective
cover will lock into place at the dot following the symbol.
6
Press and hold the on / off switch to start the grinding process.
8
The grindstone will rotate until the on / off switch is released.
5 8

Grinding

Note: Do not insert the blades until the grindstone
is turning.
5
For even results, repeatedly draw knives and scissors away from
the shaft in even movements, do not return or move back and forth.
To prevent premature grindstone wear, only grind clean blades
5
and do not apply pressure.
When grinding knives and scissors, be sure to hold the blade at
an acute angle to the grindstone (as indicated by the shape of
5
the opening). The blade may otherwise be damaged.
Remove any grinding dust residue, which may occur after
grinding, from the blades with a damp cloth.
GB/IE/NI/CY 11