Cleaning; Removing Debris From The Machine - Toro MB TX 2500 Operator's Manual

Cleaning

Removing Debris from the
Machine
Service Interval: Before each use or daily
Every 100 hours
1. Park the machine on a level surface, move
the motion-control levers to the N
position, engage the parking brake, and lower
the hopper.
2. Shut off the engine, and remove the key. Allow
the engine to cool.
3. Clean the inside of the hopper using a hose.
4. Clean any debris from under the hopper.
5. Wipe away debris from the air cleaner.
6. Clean any debris buildup on the engine and in
the transmission with a brush or blower.
Important:
It is preferable to blow dirt
out, rather than washing it out. If you use
water, keep it away from electrical parts and
hydraulic valves. Do not use a high-pressure
washer. High-pressure washing can damage
the electrical system and hydraulic valves or
deplete grease.
-
EUTRAL LOCK
37