Panasonic AG-CX350 Manual page 5

Hide thumbs Also See for AG-CX350:

Direct Selection of Default Conﬁg

If no custom conﬁgurations have been made on the RCPv2

you will be presented with this interface

Select the "Panasonic AU-EVA1" conﬁg and then go to the Firmware

Application and press "Check for updates". This will generate a

ﬁrmware ﬁle on our server and download it to the controller.

If you want to use different IP addresses then alter "Network

conﬁguration" and press "Save Network Conﬁguration" and then

press "Check for updates" in the Firmware Application

Notice on Windows the Port dropdown will display "COM" ports.

Please see section "Port selection on Windows" in Installation and

Operation manual https://www.skaarhoj.com/support/manuals/

SKAARHOJ DEVICE CORES

Selection of Default Conﬁg

If custom conﬁgurations have been made on the RCPv2 you

will be presented with this interface

Select the "Panasonic AU-EVA1" conﬁg in the drop down list. This will

load the conﬁguration on the conﬁguration page. Then go to the

Firmware Application and press "Check for updates".

This will generate a ﬁrmware ﬁle on our server and download it to the

controller.

Notice on Windows the Port dropdown will display "COM" ports.

Please see section "Port selection on Windows" in Installation and

Operation manual https://www.skaarhoj.com/support/manuals/

Table of Contents

Ag-cx10