Panasonic AG-CX350 Manual page 8

SKAARHOJ DEVICE CORES
Check IP Addresses on SKAARHOJ Controller
If you have issues connecting to the camera it is recommend to confirm that IP settings are correct. A way
to confirm IP settings on the SKAARHOJ controller is using the Serial Monitor in the Firmware Application
and check IP settings in the boot up process.
Using different IP address on Panasonic AU-EVA1 camera
You can set a different IP address on the camera as long as the Device Core IP address is updated as well.
You can use the "IP Configuration" option in the Firmware Application to change the Device Core IP
address.
8