Power Supply; Installing The Batteries; Battery Indication - Sony DWT-B01 Operating Instructions Manual

Power supply

The transmitter can operate on two LR6
(size AA) alkaline batteries continuously
for about 3.5 hours at 25°C (77°F).

Installing the batteries

1
Squeeze the battery-holder tabs inward
(in the direction of the arrows) and
slide out the battery holder.
2
Insert new batteries, making sure the
polarities are correct, and then return
the battery holder to its original
position.

Battery indication

The power status is indicated by eight level
indications.
Replace both batteries when the battery
indication starts to flash.
14 Power supply
Be sure to check the expiration date printed
date on the new batteries before using them.
Note
The indication is based on the use of new
LR6 (size AA) Sony Alkaline batteries. An
incorrect indication may result when a
different kind of batteries, a different brand
of batteries or old batteries are used. If you
plan to use the transmitter for a long period
of time, it is recommended that you replace
the batteries with brand new ones.