Attaching/Removing The Flat Beater, Flex Edge Beater*, Wire Whip, Or Dough Hook - KitchenAid 5KSM45 Manual

USING THE STAND MIXER
ATTACHING/REMOVING THE FLAT BEATER, FLEX EDGE BEATER*,
WIRE WHIP, OR DOUGH HOOK
2
Hold the locking lever in the UNLOCK
position and tilt motor head back.
4
To remove accessory: Repeat steps 1
and 2. Press accessory upward as far as
possible and turn to the left. Then pull
accessory from the beater shaft.
*Included with select models only. Also available as optional accessory.
W11389352A.indb 7
1
To attach accessory: Turn speed control
to "0". Unplug Stand Mixer.
3
Slip accessory onto beater shaft and press
upward as far as possible. Then, turn
accessory to the right, hooking accessory
over the pin on the shaft.
| 7
11/22/2019 11:52:26 AM