USING THE STAND MIXER
ATTACHING/REMOVING THE BOWL
1
To attach bowl: Turn speed control to
"0." Unplug Stand Mixer.
3
Place bowl on bowl clamping plate. Turn
bowl gently in clockwise direction.
LIFTING/LOWERING THE MOTOR HEAD
1
To lift motor head: Push the locking lever
to the UNLOCK position and lift the head.
Once lifted, the lever will automatically go
back in LOCK position to keep the head
lifted.
NOTE: Motor head should always be in LOCK position when using the Stand Mixer.
6 |
W11389352A.indb 6
2
Hold the locking lever in the UNLOCK
position and tilt motor head back.
4
To remove bowl: Repeat steps 1 and 2.
Turn bowl gently counterclockwise.
2
To put down motor head: Push the
locking lever to UNLOCK and gently
bring the head down. The locking lever
will automatically go back in LOCK
position when the head is down. Before
mixing, test lock by attempting to raise
motor head.
11/22/2019 11:52:26 AM