Attaching/Removing The Bowl; Lifting/Lowering The Motor Head - KitchenAid 5K45 Manual

USING THE STAND MIXER

ATTACHING/REMOVING THE BOWL

To attach bowl: Turn speed control
1
to "0�" Unplug Stand Mixer�
Place bowl on bowl clamping
3
plate� Turn bowl gently in
clockwise direction�

LIFTING/LOWERING THE MOTOR HEAD

To lift motor head: Push the locking
lever to the UNLOCK position and
1
lift the head� Once lifted, the lever
will automatically go back in LOCK
position to keep the head lifted�
NOTE: Motor head should always be in LOCK position when using the Stand Mixer�
Book.indb 9
Hold the locking lever in the UNLOCK
2
position and tilt motor head back�
To remove bowl: Repeat steps
4
1 and 2� Turn bowl gently
counterclockwise�
To put down motor head: Push the
locking lever to UNLOCK and gently
bring the head down� The locking
2
lever will automatically go back in
LOCK position when the head is
down� Before mixing, test lock by
attempting to raise motor head�
USING THE STAND MIXER | 9
5/4/2018 7:24:26 PM