Setting Oven Controls - Frigidaire FEB30T7DCB Owner's Manual

Electronic oven control
Hide thumbs Also See for FEB30T7DCB:
Table of Contents

Advertisement

Setting Oven Controls

To Set or Change the Temperature for Baking or Speed baking
The oven can be programmed to bake at any temperature from 170°F to 550°F (76°C to 287°C).
To Set the Controls for Normal or Speed Baking:
1. Press the BAKE or SPEED BAKE pad."— — —°" appears and "BAKE or CONV BAKE" will flash in the display.
2. Within 5 seconds, press the UP or DOWN ARROW pad. The display will show "350°F (176°C)." By pressing and holding the
UP or DOWN ARROW pad, the temperature can then be adjusted in 5°F increments (or 2°C if the control is set to display
Celsius).
3. 3 seconds after the UP or DOWN ARROW pad is released, the oven will begin heating to the selected temperature. When
the displayed temperature reaches the desired baking temperature, "Pre" will disappear from the display and the control will
beep once.
4. To cancel the baking function, press the CLEAR/OFF pad.
To Change the Oven Temperature after Baking has Started:
1. Press the BAKE or SPEED BAKE pad.
2. Press the UP or DOWN ARROW pad to increase or decrease the set temperature.
To Set Control for Continuous Bake or 12 Hour Energy Saving:
The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11
hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.
To set control for continuous baking:
1. Press and hold the TIMER ON/OFF pad down for 7 seconds. After 7 seconds "Off 12Hr Off" will appear in the display.
2. Press the UP or DOWN ARROW pad to switch between 12 Hour Energy Saving and Continuous Bake features. Note: "On 12Hr
On" in the display indicates the control is set for the 12 Hour Energy Saving mode and "Off 12Hr Off" indicates the control
is set for Continuous Bake feature.
3. Wait 5 seconds or press the START pad to accept the changes and return to the time of day display.
To Set Control for Oven Lockout (some models):
The control can be programmed to lock the oven door (some models) and/or lock the oven control pads (all models).
Please note that on some double wall ovens, the upper oven door will lock and the lower won't lock when the Oven Lockout feature
is ON; this is normal.
To Set Control for Oven Lockout feature:
1. Press the CLEAR/OFF pad and hold for 3 seconds. After 3 seconds "Off" will appear in the display and a beep will sound. Once
the oven door is locked "LOCK" will appear in the display. Allow about 15 seconds for the oven door to lock.
2. To cancel the Oven Lockout feature, press the CLEAR/OFF pad and hold for 3 seconds. A beep will sound. "Off" will disappear
from the display and "LOCK" will stay until the oven door has completely unlocked. The wall oven is again fully operational.
Note: The time of day must first be set in order to operate the oven.
3

Advertisement

Table of Contents
loading

Table of Contents