Advertisement
Model
Switch-M24eGLPWR+
Name
Model
PN28248-SG
No.
6. Software Specifications
6-5. Supported MIB
6-6. System log
6-7. Loop detection
6-8. Others
Date issued
Date revised
Product Specification
RFC1213-MIB（MIBⅡ）
SNMPv2-MIB
IP-FORWARDING-MIB
RMON-MIB
BRIDGE-MIB
P-BRIDGE-MIB
Q-BRIDGE-MIB
IF-MIB
RADIUS-AUTH-CLIENT- MIB
POWER-ETHERNET-MIB
IEEE8021-PAE-MIB （IEEE802.1X MIB）
IEEE8023-LAG-MIB （IEEE802.3ad MIB）
RSTP-MIB
Maximum number to be kept: 1,024
Transfers system logs to the Syslog server (IPv4)
Turns on the port LED with a orange light when a loop occurs in the corresponding port.
At this time, the relevant port automatically shuts down (default setting: 60 sec.) to
prevent loop from occurring.
During loop is occurring, or if loop has occurred within the latest 3 days,
LOOP HISTORY LED blinks to notify this.
• Loop detection setting
• Loop detection port
• Loop shutoff time
• Loop history retention time
Syslog Client (Transfers system logs to the Syslog server.)
TFTP Client (Upgrades the software and saves/loads configuration information.)
SNTP Client
Login RADIUS (login authentication function by the RADIUS server)
ZEQUO assist Plus
PoE timer applications
July 4, 2016
（RFC 1213)
（RFC 1907)
（RFC 2096） only IpCidrRouteTable
（RFC 2819) Group 1,2,3,9
（RFC 1493)
（RFC 2674）
（RFC 2674）
（RFC 2233) Other than IfTestTable
（RFC 2618)
（RFC 3621） deelxSoppConfigTable,
Enabled (factory default setting)
Enabled/disabled can be switched by configuring a setting using
the console.
The setting is kept even when the power is turned OFF.
Enabled: Ports 1 to 24 (factory default setting)
Disabled: Ports 25 and 26 (factory default setting)
60 to 86400 sec. (Factory default setting: 60 sec.)
The set time Port LED lights up orange and the port shuts off.
3 days
The LOOP HISTORY LED lamp flashes for three days.
The Port LED lamp also remains lit for three days after
the loop is eliminated.
Panasonic Eco Solutions Networks Co., Ltd.
401-28248-SG-SP01
Page 5 of 10
Other than dotlxSuppStatusTable
Advertisement
