HP 83447A User's And Service Manual page 11

Contents
1. General Information
Description of the HP 83447A . . . . . . . . . . . . .
Front-panel features . . . . . . . . . . . . . . . .
HP 83447A Speci cations and Characteristics . . . . . .
Declaration of Conformity . . . . . . . . . . . . . .
Electrostatic Discharge Information . . . . . . . . . .
Reducing ESD damage . . . . . . . . . . . . . . .
2. Installation and Preparation for Use
Installing the HP 83447A . . . . . . . . . . . . . . .
Step 1. Inspect the shipment . . . . . . . . . . . .
Step 2. Set the line voltage selector . . . . . . . . .
Step 3. Check the fuse . . . . . . . . . . . . . . .
Step 4. Connect the HP 83447A to a power source
Step 5. Turn on the HP 83447A . . . . . . . . . . .
Connecting the HP 83447A to a Digital Communications
Analyzer
Performing a Quick Con dence Check . . . . . . . . .
If the veri cation check fails
How to Return the HP 83447A for Service . . . . . . .
Packaging
Instrument shipping preparation procedure . . . . . .
Sales and service oces
Cleaning Connections for Accurate Measurements . . . .
To clean a non-lensed connector . . . . . . . . . . .
To clean an adapter . . . . . . . . . . . . . . . .
3. Using the HP 83447A
Waveform Test . . . . . . . . . . . . . . . . . . .
Triggering on data versus triggering on clock . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. .