Cleaning - Panasonic EH-SA35 Operating Instructions Manual

Facial ionic steamer
Table of Contents

Advertisement

Cleaning

Notes
• Disconnect the power cord from the steamer before cleaning.
• Do not wash or soak the appliance in water.
Cleaning inside the main unit
(Clean once a month.)
To remove limescale and prevent it from forming, clean the
inside of the steamer using the procedure below.
• After using, always let the main unit cool down for at least 10 minutes.
1
1
Fill the water supply tank with water up to
FULL line and close the water supply cap.
2
2
Attach the water supply tank to
the main unit.
Push the water supply tank into the
main unit until it clicks.
3
3
Shake the appliance horizontally
3 to 4 times.
Shake the appliance gently without
tilting it.
4
4
Remove the water supply tank from the main unit.
14
5
5
Discard the water from the water outlet in the
direction of the "Drain" arrow while pushing the
inclination switch on the bottom of the main unit.
Return the appliance to a flat position and repeat the step
above 2 to 3 times.
Water outlet
6
6
Repeat the steps 2 to 5 above 2 or 3 times.
7
7
Wipe off the water on the main unit and the water
supply tank.
Cleaning the appliance
(if it seems dirty)
Wipe the appliance with a cloth moistened with
soapy water.
Never use alcohol, thinner, benzine, enamel remover, etc.
Doing so may result in malfunction or part cracks or discoloration.
Cleaning the power cord
(Clean once a month.)
Remove the power plug from the power outlet and
the appliance plug from the main unit. Wipe away
any dust, etc., using a dry cloth.
Inclination switch

Advertisement

Chapters

Table of Contents
loading

Table of Contents