Setting Up The Monitor - Huawei MateView GT User Manual

Setting Up the Monitor

1
Unpack the cardboard box and place the box horizontally with the arrow on the foam
facing upwards. Take the device and foam out of the box and place them horizontally.
Take the base support out of the foam.
For an XWU-CBA monitor, you also need to connect the base and support with screws.
2
Tilt and insert the upper end of the base support into the slot at the rear of the monitor,
then press the base support downwards until you hear a clicking sound, which indicates
that the base support has been set up correctly.
3
Hold the assembled monitor with both hands and place it on a flat desk. To avoid
damaging the screen, do not press the screen when holding it.
Removing the monitor from the base support
Disconnect the monitor from its power supply, place the monitor facing downwards on the
curved foam in the original package, push the quick release button on the rear of the
monitor upwards, and lift the base support from the monitor.
5