Epson TG5032CGN Manual page 16

6-3) Clipped sine wave output for TCXO
1) Output Load : 10 kΩ // 10 pF
By-pass
Capacitor
Supply
Voltage
0.1
2) Current consumption
A
By-pass
Capacitor
Supply
Voltage
0.1
3) Conditions
1. Oscilloscope: Impedance
Input capacitance
Band width
2. Load_C includes probe capacitance.
3. A capacitor (By-pass: 0.1 F) is placed between V
4. Use the current meter whose internal impedance value is small.
5. Power Supply
Impedance of power supply should be as low as possible.
6. GND pin should be connected to low impedance GND.
Vcc
N.C.

F
Vcc
N.C.

F
Min. 1 MΩ
Max. 10 pF
Min. 300 MHz
16/21 Page
DC-cut
Capacitor

0.01 F
OUT
GND
Load_C
10 pF
DC-cut
Capacitor

0.01 F
OUT
GND
Load_C
10 pF
and GND, and closely to TCXO.
CC
Test Point
Load_R
10 kΩ
Load_R
10 kΩ
No.: TG5032xGN_AE_Ver. 1.06