Table of Contents
Advertisement
Connect power
Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Before you connect the AC power cord, ensure that
you have completed all other connections.
Connect the power cable to the wall socket.
Prepare the remote control
Caution
•
Risk of product damage! When the remote control is
not used for long periods, remove the battery.
To insert the remote control battery:
1
Open the battery compartment.
2
Insert the supplied AAA battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
8
EN
Demonstrate the features
In standby mode, press
features of this device.
» The features are displayed one by one
across the display panel.
•
To turn off the demonstration, press
again.
Set clock
1
In power-on mode, press and hold
CLOCK on the remote control for 3
seconds.
» The [24H] or [12H] hour format is
displayed.
2
Press
/
to select the [24H] or
[12H] hour format.
3
press CLOCK to confirm.
» The hour digits are displayed and begin
to blink.
4
Repeat steps 2-3 to set the hour and
minute, and whether to synchronize the
clock with an RDS radio or a DAB station
that transmits time signals.
Note
•
If no button is pressed within 90 seconds, the unit exits
clock setting mode automatically.
Tip
•
You can press CLOCK to view clock information in
power-on mode.
to demonstrate
Advertisement
Table of Contents
