Power-Up And Reset Initialization; Figure 14: Inserting The Gx2-Ea1000C*/* In The Gx2-Hsg - Motorola GX2 EA1000C Series User Manual

Installation and Setup

Figure 14: Inserting the GX2-EA1000C*/* in the GX2-HSG*

Power-Up and Reset Initialization

When the GX2-EA1000C*/* is fully installed in the GX2-HSG* and power is applied, the
initialization process begins. The GX2-EA1000C*/*
green cycle. Upon initial power-up of a new unit, the GX2-EA1000C*/* conforms to the
factory default Preset/Video mode with a 4 dB video mode offset from CW.
With subsequent power-ups, the status LED completes its power-on cycle, information
stored in the GX2-EA1000C*/* NVM is recalled, and the unit defaults to the last stored
operating mode before power was disrupted.
After initial power-up or subsequent power-ups, you can return the GX2-EA1000C*/* to
the factory default settings. You can do this through the SDU, the network management
system, or the local access port.
GX2 EA1000C*/* Multi-Wavelength DWDM 1550 nm Laser Transmitter • User Guide
589569-001-a
LED completes a red–yellow–
STATUS
B
24