Pair The Earpieces With Your Bluetooth Device For The Rst Time - Philips 8000 Series User Manual

How to wear
Insert the earpieces
1
Check left or right orientation of the
earpiece.
2
Insert the earpieces into the ears
and twist slightly until a secure t is
achieved.
Pair the earpieces with
your Bluetooth device for
the rst time
1
Auto power on: open the charging
case, operation LED indicator ash
white, with "Power on" voice prompt
from earpieces.
2
Manual power on: on both earpieces
press and hold the multi-function
buttons for approxinmately
6 seconds.
The LEDs on both earpieces
ash white and blue
Both earpieces are now power
on and are paired with each
other
The earpieces are now in pairing
mode and are ready to pair with
a Bluetooth device (e.g. a mobile
phone)
1
Turn on the Bluetooth function of
your Bluetooth device.
2
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
Note
 After powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
06"