How To Wear; Pair The Earpieces With Your Bluetooth Device For The Rst Time - Philips TAT3217 User Manual

How to wear

Select suitable ear tips for optimum t
A tight, secure t will provide the best
sound quality and noise isolation.
1
Test which ear tip provides you with
the best sound and wearing
comfort.
2
3 sizes of silicone ear tip covers are
provided: large, medium and small.
L M
Insert the earpieces
1
Check left or right orientation of the
earpieces.
2
Insert the earpieces into the ears
and twist slightly until a secure t is
achieved.
6 EN
S
Pair the earpieces with
your Bluetooth device for
the rst time
1
Make sure that the earpieces are
fully charged and powered o .
2
Open the cover of the charging
case. Press and hold the pairing
button for approximately 3 seconds.
The LEDs on both earpieces
ash white and blue alternately
The earpieces are now in pairing
mode and are ready to pair with
a Bluetooth device
(e.g. a mobile phone)
3
Turn on the Bluetooth function of
your Bluetooth device.
4
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
Note
 After powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
03"