Advertisement
The wheels and
7
depth stake need
to be adjusted
to meet your tilling needs
before operation. Removing
the clevis pin from the chain
case bracket and raise the
wheels to the desired height.
Remove the clevis pin and
cotter pin place the depth
stake in the desired position
and reinstall the hardware.
Disconnect and ground the spark plug
8
wire against the engine. Adjust the forward
clutch cable if necessary by loosening
the hex nut. Turn the cable collar section one or
two turns to increase or decrease tension on the
cable. Retighten the lock nut against the cable collar.
Reconnect the spark plug wire.
Pour the entire contents of the
9
oil bottle (included in carton)
into the oil fill.
Fill fuel tank with clean, fresh
gasoline until fuel reaches the fuel
level indicator.
© 2018 34M CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
Choke
Control
Throttle
Control
Fast Start Guide - Engine Start
Gas Cap
Oil Fill
Starter Rope
Handle
Move throttle control into the
Fast
position.
Move the choke control
into the Choke
position.
Grasp starter rope handle
and pull with quick, full-arm stroke.
When engine starts, slowly move choke
control into the Run
position.
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569
10
11
12
778-15657
Advertisement
