Advertisement
Available languages
Available languages
C
Install the wall plate on the wall
1.
Determine the template sheet position.
•
From the projection distance table, confirm the screen size (S) and the distance between the
projection surface and wall plate (c).
•
Align the Image Center line (vertical) of the template sheet with the center line (vertical) of the
projection surface.
Confirm where the beams or studs are within the wall, and shift the position left or right as necessary.
The position can be shifted horizontally left or right from the center line of the projection surface up
to a maximum of 1.77 in. (45 mm).
•
Align the
line (horizontal) on the template with the height of (c).
Image Center line of template sheet
line of template sheet
2.
Attach the template sheet to the wall.
Caution
If you need to install a junction box, you can use the cutout areas in the wall plate for the box.
The junction box needs to be recessed into the wall if you want to use the wall plate cover. The
power cord will not fit behind the wall plate cover if the junction box is not sufficiently recessed.
70.5 mm
28
Center line of
projection surface
Advertisement
