Epson V11H452520W Installation Manual page 44

Hide thumbs Also See for V11H452520W:

Available languages

8 Appendix

Using the Interactive Function (BrightLink and BrightLink Pro models)

After you install a BrightLink or BrightLink Pro model, you need to perform calibration to align the positions of

the cursor and interactive pens.

For details on BrightLink 475Wi/480i/485Wi, see the User's Guide on the BrightLink 475Wi/480i/485Wi CD. For

details on BrightLink Pro 1410Wi, see the online User's Guide. You can install a link to the guide by inserting the

BrightLink Pro 1410Wi CD.

Or, go to one of the following:

U.S.: epson.com/brightlinkdownloads

Canada: epson.ca/brightlinkdownloads

Attaching a Security Cable

If the projector is to be installed in a room where it will be left unattended, you can use a commercially

available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from

taking it.

Pass the wire for the theft-prevention wire lock through the security cable installation point.

For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock.

After installation of the projector is complete, make sure you leave the remote control,

batteries, and CDs in the room with the projector. For BrightLink and BrightLink Pro, also leave

the pens, batteries, pen tray, battery charger, and Welcome Kit folder or Quick Reference card in

the room with the projector.